Tie a Bow

Written By: Dozuki System (and one other contributor)
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

2

Time Required

Suggest a time??

Sections

1

Flags

0

  1. Flip the present over so the knot you just made is facing down on the table. Bring the ends of the ribbon around the present. Align the side of the ribbon feeding into the roll with the ribbon's loose end. Both sides of the ribbon should be roughly the same length.

    • Flip the present over so the knot you just made is facing down on the table.

    • Bring the ends of the ribbon around the present.

    • Align the side of the ribbon feeding into the roll with the ribbon's loose end. Both sides of the ribbon should be roughly the same length.

    • Cut the ribbon loose of the roll.

    • Tie a knot with your two ends of the ribbon and pull it tight.

    • Similar to Step 15, pull and press down on the knot to make it flat.

    • Tie a bow.

  2. Trim the ends of the ribbon as needed. Trim the ends of the ribbon as needed.

    • Trim the ends of the ribbon as needed.

Finish Line

Author

with 1 other contributor

Dozuki System

Member since: 09/24/2009

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 91